XNX通用发射机
XNX是一个非常灵活的气体发射器，可以配置为接受任何霍尼韦尔分析范围的气体传感器技术的输入。还可以配置为提供所有行业标准输出信号;XNX发射机的一个关键特性是它以HART超过4-20mA为标准。这使用户能够有一个单一类型的接口，以满足他们所有的气体检测需求，即使使用不同类型的探测器。
XNX经ATEX、IECEx、UL、CSA和SIL2认证，安装在防火外壳内，外壳采用船用级涂铝LM25或316不锈钢。一个大背光多语言液晶显示器，使用文字、数字和图标的组合，可以清楚地显示该设备的状态。用户可以通过磁铁开关配置或进行日常维护，而无需打开本机。如果需要本地查询，还可以选择local IS HART®终端端口。还提供了本地led，以显示该单元的状态一目了然。

XNX通用变送器配件

1226A0358 Pipe Mount Kit 
1226A0355 Ceiling Mount Bracket Kit 
S3KDMK Duct mounting kit for Series 3000 and XNX EC toxic sensors
1226A0382 MPD Interface Adaptor (for use with S3KDMK Duct Mount Kit) 
S3KCAL Calibration cup (flow adapter) for Series 3000 and XNX EC toxic sensors 
S3KRMK Remote mounting kit for Series 3000 and XNX EC toxic sensors 
02000-A-1645 Flow Housing Assembly (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD
and Series 2000)

00780-A-0035 Flow Housing (full stainless steel, for high temp applications)
S3KWP Weatherproof housing with bump test port for use with Series 3000 and XNX EC toxic
sensors

SPXCDWP Standard Weather Protection, uses for ECC toxic sensor cartridges in outdoor

02000-A-1640
Weatherproof cap for use with combustible detector including remote gassing nozzle (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000)

02000-A-1635
Weatherproof cap for use with toxic detector including remote gassing nozzle (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000)

02000-A-1642
Collecting cone for use with flammable detector (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000)

SPXCDCC
Collecting cone for use with lighter than air gases

2441-0022
UL/CSA Aluminium Junction Box Assembly (for remote mount of MPD sensors)

00780-A-0100
Honeywell Junction Box- Bartec OTB122 With Continuity Plate 1 X 25mm - 3 X 20mm Entries - ATEX Approved

MCT404-XA-02-00
Honeywell HART Communicator for use with XNX Range and Optima Plus gas detectors, Intrinsically-safe, with FM Class I, Div 1/Zone 1, ATEX and IECEx Zone 1 approvals. Including rechargeable battery, mains powered charger and docking station

50079567-011
Leather carrying case for MCT404 (Stylus & shoulder strap included)

10000-A-0004
SS316 Mounting Plate for 2" to 2.5" pipe mounting (Sourced from HAAP Singapore)

10000-A-0054
XNX Transmitter Sunshade (Sourced from HAAP Singapore)

10000-A-0190
2” Pipe mount “V” bracket, M10, including washers & nuts, SS316 (Sourced from HAAP Singapore)

XNX-FLOW
SS316 Flow Housing for ECC Sensors - for Aspirated Sampling Systems (Sourced from HAAP Singapore)

1226A0354
Remote Gassing Kit

1226-0257
M25 Stopping Plug w/ protective cap and O-ring

1226-0258
3/4" NPT Stopping Plug w/ protective cap and O-ring

0235-0238
Replacement O-ring for XNX front cover

1226A0302
Terminal Block Assembly 6-Pin for XNX EC
1226A0304
Terminal Block Assembly 9-Pin for XNX mV

1226A0305
IR Terminal Block Assembly Kit includes: 9-Pin & 2 Pin blocks

1226A0306
Relay Terminal Block Assembly Kit includes: 9-Pin and 2-Pin blocks

1226A0307
Terminal Block Assembly 10-Pin for XNX Modbus

1226-9001
XNX Transmitter Spare Pod, Infrared Personality, No Options

1226-9002
XNX Transmitter Spare Pod, Infrared Personality, Relay Option

1226-9003
XNX Transmitter Spare Pod, Infrared Personality, ModBus Options

1226-9004
XNX Transmitter Spare Pod, Infrared Personality, Foundation Fieldbus Options

1226-9009
XNX Transmitter Spare Pod, Millivolt Personality, No Options

1226-9010
XNX Transmitter Spare Pod, Millivolt Personality, Relay Option

1226-9011
XNX Transmitter Spare Pod, Millivolt Personality, ModBus Option

1226-9012
XNX Transmitter Spare Pod, Millivolt Personality, Foundation Fieldbus Options

1226-9005
XNX Transmitter Spare Pod, Electrochemical Personality, No Options

1226-9006
XNX Transmitter Spare Pod, Electrochemical Personality, Relay Option

1226-9007
XNX Transmitter Spare Pod, Electrochemical Personality, ModBus Option

1226-9008
XNX Transmitter Spare Pod, Electrochemical Personality, Foundation Fieldbus Options
XNX-RLY
Relay Option

XNX-MB
ModBus Option

XNX-FFB
Foundation Fieldbus Option

SPXNXSERVK
XNX Service Kit, Including Replacement O-ring for XNX front cover, I.S. modules screws (2 pieces), Earth screw and bracket (3 pieces), O-ring for MPD housing, MPD Sinter O-ring, MPD Sinter locking screw (set screw), ECC sensor - 3 off O-rings, ECC Sensor Lid O-ring, ECC sensor lid - locking screw (set screw)

SPXNXTOOLK
XNS Tool Kit, Including Magnetic Wand/Screwdriver, Small Screwdriver (for use with Relay board and IR personality board), HEX L-KEY 2.0MM, HEX-L-KEY 1.5MM X 3.06"L

94000-A-1006
XNX 2" pipe mounted sunshade with U-bolt in 316SST painted white for use with Optima Plus / MPD / Sensepoint PPM, EC Toxic & Oxygen detectors